Setting the safety valve

Started by High Pressure Master, October 22, 2022, 06:14:55 PM

Previous topic - Next topic

High Pressure Master

Setup of the safety valve in a bluegold watermaker.jpg

  • Open the pressure regulation valve (2) completely.
  • Open the safety valve (1) completely.
  • Start the watermaker.
  • Slowly close the pressure regulating valve (2) completely.
    The pressure should remain at 0 bar and all water is drained via the safety valve.
  • Close the safety valve (1) slowly until 68 bar is displayed on the pressure gauge.
  • Open the pressure regulation valve (2) completely
  • Switch off the watermaker.

SMF spam blocked by CleanTalk